Use New Unitized Non-Woven Wheels for finishing, contouring, shaping, satin finishing and smoothing metals, acrylics, plastics, composite. Can also be used on wood, but not for sanding.
From 180 grit all the way up to super fine 5000 grit, mounted on 3/32″ (2.35 mm) shanks, these sandpaper rolls are efficient and economical for fast clean up, sanding and pre-polishing.
5,000 RPM Max Speed As the abrasive wears, simply peel the paper back and tear it off to expose fresh abrasive. The roll is made up of 1″ wide x 10″ lengths of high-quality abrasive paper. Overall length of accessory is 2-1/4″ (57 mm).*Optimum Operating Speeds are much lower (between 25% – 50% of maximum speeds) and also depend on the type of workpiece.
Extra Fine Grit (A-5534), Fine Grit (A-5535), Medium Grit (A-5536), Coarse Grit (A-5537) Unmounted 3 Satin Finisher Double Ply Wheels with Canvas Reinforced Arbor Holes for use on Tapered Spindles of BL Bench Lathe Can also mount onto NEW A-M89 Mandrel for use in Flexible Shaft Handpieces. New and improved Scotch-Brite Satin Finisher Wheels give metal a soft, medium, or coarse finish. All grades are handy at removing firescale from sterling silver and copper and can also be used to prepare pieces for polishing. Wheels perform well around all types of contoured surfaces and give a uniform finish. They stay together better than traditional satin finishers therefore creating less dust and particles in the air.